Rust preventive

Long-term effective liquid-type vaporizable rust preventive

For precision and export dies, die marking, and die storage

【Features】

• Barrier Guard Part II features high heat resistance.
  The rust-preventive effect is achieved regardless of the die temperature (approx. 130℃).
• Barrier Guard Part II is remarkably safe.
  Barrier Guard Part II does not contain nitrites or nitrates such as dicyclohexylammonium nitrite, and is toxicity is almost negligible. It is compliant with the Food Sanitation Law and the Specifications and Standards for Food Additives, etc.(1959, Ministry of Health and Welfare, Notification No. 370).
• The die startup time is significantly reduced.
  Barrier Guard Part II entirely gasifies with only 3 shots (for colorless) or 7 shots (for colored) of preliminary injection. It does not exude from ejector pins or slide parts, so it will not leave oil stains on molded articles.
• The length of time until the beginning of secondary processing is reduced.
  Secondary processing such as painting, printing, and adhesion can be performed immediately after the first or second shot of injection.
• Barrier Guard Part II will not affect plastic materials.
  The accidental adhesion of Barrier Guard Part II to molded articles has little effect, and causes no problems such as chemical cracks.
• Barrier Guard Part II will not clog or plug up an air-venting groove.
• Barrier Guard Part II achieves good effects on unwashed embossing or mirror-finished dies.
• Even with injection-molding dies, no oil stains are left from the first injection shot.

Sister product

Volatile rust preventive agent BARRIER GUARD Spray 420ml

To purchase or to learn more about our products, please contact our overseas agencies directly.

Wide range of applications, from die-making to molding New type of vaporizable rust reventive

PRTR-compliant, Organic-Solvent Poisoning Prevention Rules inapplicable.

Prevention effective for approximately six months

【Feature】

• Supplemist significantly reduces the die startup time.
  From the beginning of molding, only 3 to 5 shots of preliminary injection are necessary to produce conforming articles.
• Supplemist is remarkably safe.
  Supplemist does not contain nitrates or nitrites such as dicyclohexylammonium nitrite, and its toxicity is almost negligible. It is compliant with the Food Sanitation Law and the Specifications and Standards for Food Additives, etc.(1959, Ministry of Health and Welfare, Notification No. 370).
• Use temperature range: ambient temperature up to 100℃
• Supplemist will not affect plastic materials.
• The accidental adhesion of Supplemist to articles has little effect, and causes no problems such as solvment cracks.

Contents: 420ml Packages of 24 cans

To purchase or to learn more about our products, please contact our overseas agencies directly.