TOPPlastic Molding AgentsRust preventive

Rust preventive

Long-term effective liquid-type
vaporizable rust preventive

For precision and export dies, die marking, and die storage

Features

  • Barrier Guard Part II features high heat resistance.
    Barrier Guard Part II does not contain nitrites or nitrates such as dicyclohexylammonium nitrite, and is toxicity is almost negligible. It is compliant with the Food Sanitation Law and the Specifications and Standards for Food Additives, etc. (1959, Ministry of Health and Welfare, Notification No. 370).
  • Barrier Guard Part II is remarkably safe.
    Barrier Guard Part II entirely gasifies with only 3 shots (for colorless) or 7 shots (for colored) of preliminary injection. It does not exude from ejector pins or slide parts, so it will not leave oil stains on molded articles.
  • The die startup time is significantly reduced.
    Secondary processing such as painting, printing, and adhesion can be performed immediately after the first or second shot of injection.
  • The length of time until the beginning of secondary processing is reduced.
    Secondary processing such as painting, printing, and adhesion can be performed immediately after the first or second shot of injection.
  • Barrier Guard Part II will not affect plastic materials.
    The accidental adhesion of Barrier Guard Part II to molded articles has little effect, and causes no problems such as chemical cracks.
  • Barrier Guard Part II will not clog or plug up an air-venting groove.
  • Barrier Guard Part II achieves good effects on unwashed embossing or mirror-finished dies.
  • Even with injection-molding dies, no oil stains are left from the first injection shot.
    * The above data differs according to the conditions for use
View Catalog

※To purchase or to learn more about our products,please contact our overseas agencies directly

Wide range of applications,
from die-making to molding New type of
vaporizable rust preventive

PRTR-compliant, Organic-Solvent Poisoning Prevention Rules inapplicable.

Features

  • Supple Mmist significantly reduces the die startup time.
  • From the beginning of molding, only 3 to 5 shots of preliminary injection are necessary to produce conforming articles.
  • Supple Mmist is remarkably safe.
  • Supple Mmist does not contain nitrates or nitrites such as dicyclohexylammonium nitrite, and its toxicity is almost negligible. It is compliant with the Food Sanitation Law and the Specifications and Standards for Food Additives, etc. (1959, Ministry of Health and Welfare, Notification No. 370).
  • Use temperature range: ambient temperature up to 100°C
  • Supple Mmist will not affect plastic materials.
  • The accidental adhesion of Supple Mmist to articles has little effect, and causes no problems such as solvment cracks.
    * The above data differs according to the conditions for use

Contents: 420 ml Packages of 24 cans

View Catalog

※To purchase or to learn more about our products,please contact our overseas agencies directly